T-34/85 Metal Edition Kit

T34.jpg
TAG120240.1.jpg
TAG120240.jpg
TAG120242.jpg
TAG120242-2.jpg
TAG120243.jpg
TAG120244.jpg
TAG120245.jpg
TAG120248.2.jpg
TAG120248.jpg
TAG120249.2.jpg
T34.jpg
TAG120240.1.jpg
TAG120240.jpg
TAG120242.jpg
TAG120242-2.jpg
TAG120243.jpg
TAG120244.jpg
TAG120245.jpg
TAG120248.2.jpg
TAG120248.jpg
TAG120249.2.jpg

T-34/85 Metal Edition Kit

349.99

Want your T-34/85 unpainted or without electronics? Want to assemble it yourself? Then our T-34/85 kit is your perfect option!

Included in the T-34/85 kit is the following:

  • T-34/85 metal lower chassis with metal suspension arms pre-installed. This chassis also includes our steel gearboxes in 4:1 ratio and our easy open latch system. The main power cable, volume control cable, and smoke unit switch are also pre-installed.
  • T-34/85 metal drive and idler wheel set. Our idlers include bearings for super smooth operation.
  • T-34/85 metal road wheel set with bearings.
  • T-34/85 metal closed pin track set.
  • Airsoft or Infrared metal turret prewired with metal hatches and accessories.
  • Detailed upper hull with pre-installed metal photo etched grills.

This kit will come unassembled and will require some very basic skills to put together. This kit will also come unpainted and without a smoke unit, motherboard, speaker, or transmitter. This model also does come with gearboxes, there is no additional need to purchase gearboxes for this kit. 

 

Airsoft or Infrared:
Quantity:
Add To Cart

Warning! This tank does NOT come with all the components to make this tank operational! You will need a motherboard and transmitter at the minimum to operate this tank. You can use the Taigen system (V1 or V2) or you can use an aftermarket system like the IBU2 series boards. If you wish to use the Taigen system you can purchase them HERE in our electronics section. Please feel free to use the CONTACT US or TECH SUPPORT pages with any questions you may have before purchase, we are always happy to help!

For a fully functioning model you will need to make sure your tank has at least these components: a power cable (with your battery connector end whether it be Deans/T-Plug or the normal Tamiya plug style), a 2.4ghz wiring kit, motherboard (which has the receiver built in), transmitter, and smoke unit. Please also check if your kit comes with gearboxes, so do and some do not. Once again please feel free to contact us with any questions you may have!