Sherman M4A3 75mm Metal Edition Kit

20140902_105238_HDR.jpg
tag120648.jpg
tag120644.2.jpg
tag120643.4.jpg
tag120647.jpg
tag120641.2.jpg
TAG120645.jpg
20140902_105238_HDR.jpg
tag120648.jpg
tag120644.2.jpg
tag120643.4.jpg
tag120647.jpg
tag120641.2.jpg
TAG120645.jpg

Sherman M4A3 75mm Metal Edition Kit

from 319.99

This is a unbuilt mix of painted and unpainted parts for the Taigen Sherman M4A3 75mm tank. This kit comes with a solid metal lower chassis, metal drive wheels, metal idler wheels, metal caterpillar tracks, upper hull, metal turret, metal mantlet, metal cupola, metal gun muzzle, and your choice of either airsoft or infrared turrets.

This kit will come unassembled and will require some very basic skills to put together. This kit will also come painted and will not contain a motherboard, transmitter,  speaker, or smoke unit. This model also does not come with gearboxes, you can find the correct gearboxes for this model HERE (Please select the 45mm shaft variants).

 

Airsoft or Infrared:
Quantity:
Add To Cart

Sherman M4A3 75mm

ARTR (Almost Ready To Run) Kit


Warning! This tank does NOT come with all the components to make this tank operational! You will need a motherboard and transmitter at the minimum to operate this tank. You can use the Taigen system (V1 or V2) or you can use an aftermarket system like the IBU2 series boards. If you wish to use the Taigen system you can purchase them HERE in our electronics section. Please feel free to use the CONTACT US or TECH SUPPORT pages with any questions you may have before purchase, we are always happy to help!

For a fully functioning model you will need to make sure your tank has at least these components: a power cable (with your battery connector end whether it be Deans/T-Plug or the normal Tamiya plug style), a 2.4ghz wiring kit, motherboard (which has the receiver built in), transmitter, and smoke unit. Please also check if your kit comes with gearboxes, so do and some do not. Once again please feel free to contact us with any questions you may have!