Jagdtiger Metal Edition Kit

20160819_145340.jpg
jagdtiger kit picture.jpg
Clipboard01.jpg
Clipboard02.jpg
Clipboard03.jpg
Clipboard04.jpg
Clipboard05.jpg
20160819_145340.jpg
jagdtiger kit picture.jpg
Clipboard01.jpg
Clipboard02.jpg
Clipboard03.jpg
Clipboard04.jpg
Clipboard05.jpg

Jagdtiger Metal Edition Kit

from 429.99

Want your Jagdtiger unpainted or without gearboxes or electronics? Want to assemble it yourself? Then our Jagdtiger kit is your perfect option!

Included in the Jagdtiger kit is the following:

  • Jagdtiger metal lower chassis with torsion bar suspension system and metal suspension arms. Also includes metal tow hooks, our easy open latch system, and metal exhausts.
  • Jagdtiger metal drive and idler wheel set. Our idlers include bearings for super smooth operation.
  • Jagdtiger metal road wheel set with bearings.
  • Jagdtiger metal closed pin track set.
  • Airsoft OR Infrared upper casemate prewired with metal hatches and accessories.

This kit will come unassembled and will require some very basic skills to put together. This kit will also come unpainted and without a smoke unit, motherboard, speaker, or transmitter. This model also does not come with gearboxes, you can find the correct gearboxes for this model HERE (Please select the 58mm shaft variants).

Airsoft or Infrared:
Quantity:
Add To Cart

Jagdtiger

ARTR (Almost Ready To Run) Kit - Unpainted & No Electronics


Warning! This tank does NOT come with all the components to make this tank operational! You will need a motherboard and transmitter at the minimum to operate this tank. You can use the Taigen system (V1 or V2) or you can use an aftermarket system like the IBU2 series boards. If you wish to use the Taigen system you can purchase them HERE in our electronics section. Please feel free to use the CONTACT US or TECH SUPPORT pages with any questions you may have before purchase, we are always happy to help!

For a fully functioning model you will need to make sure your tank has at least these components: a power cable (with your battery connector end whether it be Deans/T-Plug or the normal Tamiya plug style), a 2.4ghz wiring kit, motherboard (which has the receiver built in), transmitter, and smoke unit. Please also check if your kit comes with gearboxes, so do and some do not. Once again please feel free to contact us with any questions you may have!