Taigen V3 2.4GHz Upgrade Kit (TX/MB/Sound Card/Speaker)

v3 mb tx and sound card.jpg
v3 mbpsd.jpg
TAG120605.5.jpg
v3 motherboard and sound card.jpg
TAG120606.1.jpg
TAG120606.4.jpg
TAG120605.jpg
new taigen mb instructions.jpg
v3 mb tx and sound card.jpg
v3 mbpsd.jpg
TAG120605.5.jpg
v3 motherboard and sound card.jpg
TAG120606.1.jpg
TAG120606.4.jpg
TAG120605.jpg
new taigen mb instructions.jpg

Taigen V3 2.4GHz Upgrade Kit (TX/MB/Sound Card/Speaker)

99.99

This is the new V3 Taigen motherboard and sound card combo from Taigen Tanks! This new motherboard from Taigen offers a bunch of highly requested features!

  • Ability to use the stock Taigen transmitter or your own transmitter (6ch PWM) right out of the box with no mods! (PWM Wiring not included, please see part TAG120608 if you wish to use your own transmitter for the cable set!)

  • New sound system! New modular sounds via sound cards will now be the standard. Swapping sounds will now be super simple and requires no setup or configuration.

  • Proportional smoke control! Compatible with all V1 and V2 smokers from Taigen, just plug and play.

  • Better motor control! Now proportional turret control and better main motor resolution.

  • New ability to turn on or off track recoil via a switch on the motherboard! This feature is available on the V3 only.

The new system is plug and play with all previous Taigen Tanks and can be installed by just swapping cables with the previous version and rebinding your transmitter.

(This listing is for x1 Taigen transmitter, motherboard, speaker, sound card, and our new volume knob. The PWM wiring kit to use your own transmitter can be found HERE, please make sure to pick up a set if you wish to use your own transmitter!)

Quantity:
Add To Cart

This new motherboard offers lot of requested features over our first generation electronics. This board has an all new sound system, uses the stock transmitter OR your own transmitter right out of the box, has proportional smoke unit output, proportional turret rotation, and better main motor resolution. The V3 has also added a small switch on the motherboard to turn on or off track recoil with the flick of a switch!

The sound system is all new and now consists of a separate sound card. Separating the sound card from the motherboard allows us to add new sounds quicker and much cheaper for you. Now when you want to change sounds you can just swap a few cables and you are good to go with no configuration or setup! Now compatible with the Open Panzer TCB! More sound cards will be available in the future.

We have also added the ability to use your own transmitter out of the box as well if you do not wish to use the stock transmitter which has also been upgraded. All you need is a 6 channel PWM based receiver and our wiring kit found HERE and you are good to go. Instructions are posted above. A new transmitter is now included with the 2.4GHz system though the older transmitters can be used with limited functions. We highly suggest the new transmitter to pair with this system if you do not plan to use your own transmitter. The new transmitter has an additional button added to the top right of the controller that now acts as the new Machine Gun function while the toggle switch is now the on/off function for the smoke unit. 

Proportional smoke unit output has been added too! This new feature is compatible with all previous Taigen V1 and our current V2 smoke units. Just plug and enjoy, no modifications needed. Now enjoy proportional smoke units at a great price :) 

Increased motor control! Improved main motor output resolution (better low speed control) and also proportional turret rotation has been added to the new system. 

This system is everything you need to upgrade from our V1 Taigen electronics system. It includes the newest transmitter, motherboard, receiver cable set, speaker, and our Tiger 1 sound card. No soldering or any wire changes needed, just plug and play upgrade!