Sherman M4A3 Metal Lower Chassis

tag120648.1.jpg
tag120648.jpg
tag120648.1.jpg
tag120648.jpg

Sherman M4A3 Metal Lower Chassis

111.99

The Taigen Sherman M4A3 Chassis is a super tough 2 piece stamped lower hull. It is 2.2mm thick and is one of the strongest hulls you can get in 1/16th scale! The front transmission cover is held on by 4 screws so that you can easily remove it to do maintenance or modify the cover easily. The tank also comes with a battery holder than can be installed to hold the stock 2000mAh battery and a switch panel on the bottom of the tank that can be removed or relocated with a few screws.

This lower hull is an all new design for Taigen and is SUPER durable. Paired with the Taigen suspension this tank can carry more weight than you could ever load on it realistically! It also makes for a very awesome robot chassis too!

Quantity:
Add To Cart

Sherman Videos

Note: The Taigen Sherman lower chassis uses our High/Low, 3:1, 48mm gearboxes, but due to a clearance issue it cannot fit the 4:1 gearboxes without a bit of material removal from the inside of the transmission cover. Please contact us if you need this procedure done for you or have questions.