Taigen 390 Motors (1 Pair)

20170220_131503.jpg
20170220_131520.jpg
20170220_131558.jpg
Pinion Position 3.1 top vs 4.1 bottom.jpg
20170220_131503.jpg
20170220_131520.jpg
20170220_131558.jpg
Pinion Position 3.1 top vs 4.1 bottom.jpg

Taigen 390 Motors (1 Pair)

from 24.99

Included is a set of 390 motors from Taigen. These motors have the pinions installed on them but may require an adjustment to fit your 3:1 or 4:1 gearboxes perfectly. 

The motors comes wired and with JST-XH connectors to connect to your stock Taigen board or other aftermarket systems. The new motors are 25k RPM motors and are 28mm in diameter by about 47mm in length so please make sure your motor will fit. The motor tabs also add an additional ~5mm as well, so add those to your motor measurements when measuring for fit. 

 

You can also turn this motor into a gearbox combo by selecting the option below. If selected you can add a pair of Middle/Low, 3:1,  58mm shaft gearboxes with these motors installed for you. These gearboxes are our new black type but come with bushings instead of bearings for the reduction gears. 

Gearbox Combo:
Quantity:
Add To Cart